Tuesday, 2 February 2016

The S-Dub Project, Part 2: I'm a lazy turd and didn't follow up on this...

So as the title states, I was lazy and never posted a second part the week after the first like I said I would.
I could make all the lame excuses I want, but a majority of the reason was because the day after that post, this happened:


Yep. Got a cat.
Her name is Jellybean, and this blog is not about her.


So where I ended up at my last post was home, I guess.
We had driven 2,100 kilometers from Brisbane to Adelaide with no issue, which was incredible.
And so I had to get the car registered in SA. No easy feat given the laws regarding registering cars with interstate number plates.
It gets doubly hard with imported cars. I would have had to go through a full roadworthy inspection if the car had a yellow VIN plate riveted to the chassis. Yellow means the car was personally imported, and green ones are dealer imported.
Green = good.
Mine has a green plate, so I was in the clear for that, which meant I needed to do an ID check.

How an ID check works is an official (of sorts) working for the Dept. of Transportation of SA inspects your car to make sure it doesn't have any illegal parts, and that the engine number and chassis number match the paperwork you have for the car. This stops people from getting cars with swapped engines and stolen vehicles registered in others states and such.
They check 5 things: window tint has to be legal, no turbo timer, seat belts retract properly, engine number matches the paperwork, and that the VIN has been stamped into the chassis.

Sounds simple, right?
Well, it is. The hard part for me wasn't the inspection, it was getting the car there.

We managed the insanely long trip home without any issues, but the car had been neglected for years before I had bought it. The cooling system hadn't been flushed in god knows how long and wouldn't reach operating temperature without sitting still for 20 minutes, The rear brakes were seized, the turbo manifold was loose, there was a crack in the dump pipe and the power steering rack was leaking.
So it definitely needed some work.

The first thing I had to do was pull it all apart! So apart the car came.
On stands and ready to rip into it


It looked like this for a good month or two.

While I was waiting for replacement parts, I got a chance to learn more about the turbo in this one, because it definitely wasn't running stock boost and had a pretty big kick behind it,

What we have here is a Toyota CT20B turbocharger.
It turns out that this is A standard turbo for an SW20 MR2, just not this particular car.
These came on the post-94 SW20's and are a bolt-on upgrade from the standard CT26 that they should have.
I had to pull the turbo off to replace the manifold gasket and a missing exhaust stud, as well as send the dump pipe off to get the crack repaired as a temporary fix.
The turbo had a couple of millimetres of shaft play, but it was just within tolerance, so I left it and chucked it back on when everything else was ready.

Next was the cooling system.
SW20 MR2's have one of THE most difficult cooling systems to deal with.
Unless you own an FD3S RX-7, your cooling system is easier to work with. These cars have an 11.6L (don't quote me on that exact number) capacity and no header tank, just an overflow. The filler neck is in the engine-bay, and the radiator is a sealed unit once the pipes are connected.
My issue wasn't with the cooling system not being efficient enough, though. It was quite the opposite!
We assumed the thermostat was stuck open, which means that the coolant flow isn't impeded enough to get the engine up to temp. This is a common problem in these cars, and not a difficult fix.
What I found was not a stuck thermostat.

The stat on the left is what came out, and the one on the right is a Toyota OEM 86 degree Celsius thermostat.
The one on the left wasn't doing shit. So it went in the bin.
Might've been useful on a devoted track car, but not this.

And so my cooling issue was fixed.

Next on the list was the steering rack. I needed to replace the inner-rack ends. A job I did on my previous car as well. It's easy enough.
I also needed to rebuild my steering rack, since it was leaking.
I was foolish enough to buy a seal kit and attempt it myself. After a failed attempt and a ruined steering rack, my only conclusion is that Power Steering works through witchcraft.
So I got a second-hand rack from interstate for fairly cheap and chucked it in. Rebuilds are best left to the professionals.

Now that my turbo was back on, and I could steer again, there was only one job left to do.

Axle seals.

Replacing axle seals on Turbo SW20's is an awful job, as I soon learned.
The N/A MR2's have an S54 transaxle, which is fairly lightweight, but brittle. If you force too much power through them, they'll break.
The turbo models came with the E153 transaxle, which is substantially heavier, but damn near unkillable unless you run some MONSTER power, and I know a couple of people who put 350+rwKw through a stock trans.
The issue with the E153 being heavy is that the drive shafts are ALSO heavy.
SO heavy, in fact, that the driver side shaft (which is the longer one by about 2 times) has a carrier bearing that bolts to the block, which makes fitment and removal a bit difficult at the best of times.
Add in a circlip that holds the spline in the differential and you have a recipe for bending prybars and skinning knuckles.

Furthermore, each side has a specific seal, and will only fit in that side. So you have to make sure to order the 2 different ones.

Here we have, on the right, the driver-side Axle seal for an E153 Trans.
On the left, however, I have NO idea what it was supposed to be, but it definitely wasn't large enough to house an axle.
I was sent the wrong part.
Fortunately, the passenger side had been done recently, so I left it and had no issues with it.
The right sucked to replace and I don't want to do that again ever.

And then, it was time to get a day-permit and take my car for an ID inspection!
It's a decent drive from where I lived to the inspection place I chose, which was good as it gave me a chance to test out the car again and make sure everything was actually working!
The good news came in droves that day!
The car ran well, didn't leak any coolant or gearbox oil, boosted kinda nicely and I was on the road again!
I went in for the inspection, had my tint checked, engine number found (much to the inspectors displeasure, since it was hiding under half the cooling system), seat belts retracted, and then failed because my VIN was riveted to the chassis on a plate, instead of stamped.

Cue rushing to the nearest mechanics to find someone with a stamp kit who would stamp my VIN for me.
Eventually, I found a workshop of engine builders who kindly lent me their stamp set and pretended it never happened.
I am dreadful at stamping, it turns out, but it got passed anyway, and I picked up my number plates on the way home!

All in all, it was worth the couple of months of waiting to finally have it running again!

I'll aim to put up another post a liiiiittle sooner than my last one. I'm trying to be more proactive now, and so far it's working!

See you guys soon!

Here's a cat tax for putting up with my ramblings!

Wednesday, 13 January 2016

Welcome to "The S-Dub Project"

Hey guys,

It's time to find something better to do with my time, that won't continue to cost me money (hah), and will be somewhat productive.

A new blog for my ongoing car build sounds like fun, and hopefully will allow me to improve my writing skills to a  level that proves both informative and entertaining!
I plan to go quite in depth with these posts, and they will most likely be very long-winded...

So here we go, post number 1:

In January of 2015, I went to NSW in my 1991 SW20 Toyota MR2. I live in SA, so it was a 1,200 kilometer trip one-way.
I went there to race at Wakefield Park at the MR2 Trackday Challenge, an ongoing event for MR2's all across the country to meet up and race for two days, and for the drivers of said cars to socialize and discuss their cars, setups and learn more from each other.
All round a fantastic time and I learned a great deal from the people who attended.
In my MR2, I raced around the track for two days, had a blast and learned a great deal about handling these small, difficult cars.
Mine was a fairly standard car, with only suspension modifications and some excellent tyres. The engine was a 100% stock 3S-GE with an optimistic 100rwKw on a good day with no air restrictions.
I never checked mine, and it was clogged, which probably reduced it to closer to 70rwKw, which isn't exactly ideal...

Regardless of these developments and my idiocy, I took home first place in my class (standard street >2L), and placed 15th overall in the event of 35+ cars.

While there, I asked the recommendations of many people in terms of what to do to get a bit more power out of the car, and had a few ideas of my own.
Every person I asked canned my own ideas simply because of budget restrictions. I would have liked to pull the existing engine out, rebuild it, put a turbocharger on it and run it on low boost, giving me a highly responsive turbo setup.
The issue with this being that this would require forged internals, a turbo and manifold, as well as a full exhaust system, a custom ECU setup and assorted other modifications to suit.
This costs a lot of money, and more than I was willing to spend, so I decided it would be better to follow a different course of action.

Here's my lovely old car racing around Wakefield Park
Classy, right?
One of the only photos of my car from the event, and I'm not even on the track for it...

So 3 weeks after returning from NSW, I sold my beloved MR2 of 2 years and uncounted hours of pulling apart and rebuilding, and moved on.


In February 2015, I came across another car for sale in Queensland. A turbo MR2 with a good engine, gearbox, low k's and quite a bit of fruit on it, from the photos.
I bought a pair of plane tickets for myself and a good mate, and we flew over to Brisbane to take a look at this car.
After spending a few hours going over it, and fixing a few small issues we found that would definitely inhibit the drive home, we decided it was a steal and I bought it.

And so began the 2,000k drive home.
We managed it in 24 hours.

For anyone who understands how far that is, it's insane that we managed it, and we both nearly died of exhaustion upon arriving home.
I went to work the next morning.

Here's a photo of her in ALL her splendid glory!

Beautiful, isn't she?

Not without her issues, this car is most certainly a steal!
From this point, I had to get it running properly, leak free, give the cooling system some MUCH needed attention and then registered in SA.
This took a lot longer than I would have liked, but there wasn't much I could do.


I suppose this will do for an introduction.  From here on in, I'd like the posts to be a bit more photo-heavy where I can.

I'll hopefully be posting once a week and will do updates on the build as it went until I get to the present, at which point the build will be slower, but hopefully a LOT more interesting from post-to-post.

Questions about the car and build are welcome, and I will answer them to the best of my ability!

Take care guys, drive safe and talk to you next week!